Visit the TEXAS HURRICANE CENTER webpage for
    Hurricane Harvey-related information and resources

                 Sunset Announcement


Equipment Overview

  Inspection Station in Non-Emissions Counties Inspection Station in Emissions Counties
Testing Devices VIC Unit Components consist of CPU, bar code scanner, metal cart, monitor, keyboard, mouse and related cables and cords. The cart will take up approximately four square feet of floor space (20” x 26”). Emissions Testing Analyzer
(OBD, ASM, TSI)

See specific details about testing equipment and options for purchasing emissions testing analyzers.
A/C Power Standard Grounded 3-Prong 110 volt A/C outlet. (within three feet of unit) Standard grounded 3-prong 110 volt A/C outlet
Data Communications Agreement None Station must enter into a communication agreement with Gordon-Darby.

Gordon-Darby Communication Agreement Form

Connectivity
Options
Broad Band (recommended) or
Analog Phone Line

See Connectivity Setup (PDF)
See Internet Connectivity (PDF)
Broad Band (recommended) or
Analog Phone Line
Printers

*Beginning March 1, 2015, all Inspection Stations must provide a printed VIR at the end of an inspection.  VIC approved printer list last updated June 12, 2017.

Approved List for stations needing to purchase a printer (6/12/2017)

Dell models
B1260dn
E310dw

Lexmark
MS312dn
MS315dn

Okidata
B411d

Included with emissions testing analyzer purchase
VIC Legacy Printers (not for use with Emissions Analyzers)
You may continue to use your stationís VIC printer if it was connected and working properly as of Dec. 1, 2014. Support for legacy printers not on the current, approved list has ended. If your printer is not working properly, purchase a new printer from the Approved Printer list above.

If your printer is on the Approved Printer List above and you are having problems printing, please contact the VIC Help Desk at (855) 845-0842.

Equipment Requirements to conduct inspections
  • VIC Unit
  • Printer
  • Internet Connection (broadband/phone)
  • Emissions Testing Analyzer/Printer
  • Data Contract with Gordon-Darby
  • Internet Connection (broadband/phone)
Equipment Repair/Replacement VIC Help Desk:
(855) 845-0842 or
(855) 845-0-VIC

See repair/replacement.
Contact your analyzer manufacturer
Technical Support VIC Help Desk:
(855) 845-0842 or
(855) 845-0-VIC
Data Transmission Issues:
Gordon-Darby Help Desk (877) 434-8467

Emissions testing analyzer issues:
Contact your analyzer manufacturer